Ikelite 200DLM/A Underwater Housing for Canon EOS M6 Mark II Mirrorless Cameras
3303
3824
3824
Special order ships generally within 7 to 14 days, depending on availability. This housing requires the addition of a compatible lens port for waterproof operation. Lens port not included. The 200DLM / A Underwater Housing is the perfect companion that allows the use of Canon EOS M6 Mark II mirrorless cameras in or around water for scuba, snorkeling, surfing, pool, or any adventure. Canon EOS M6 Mark II At first glance, the Canon EOS M6 II may seem similar to the original M6 camera, but it is physically different both inside and outside. The EOS M6 II has a new 32.5MP APS-C CMOS sensor with Dual Pixel autofocus. Unlike its predecessor, it has joined modern times and now supports 4K UHD video recording at either 30p or 25p. Ergonomics and handling Good ergonomics are critical when you need to focus on composition, focus, and proper exposure. Large, curved control levers put the most important controls right where you need them: shutter and autofocus (via the AF/MF button). This combination allows you to shoot with or without back button focus, an advanced technique useful for tack-sharp focus of super macro and fast-moving subjects. Each lever can be extended using the optional Shutter Trigger Extension # 4077.95 for perfect spacing when using a right-hand handle. The control dial, rear control wheel, mode dial, power, and lens release controls are all operated intuitively via premium soft-touch knobs. Stainless steel, direct-drive rotating controls are virtually fail-safe and user-serviceable and adjustable in a pinch. All rear camera buttons are accessible by smooth action, hard anodized aluminum push buttons for reliable performance and easy maintenance. These controls are clearly labeled by laser engraving on the back of the housing that never fades or falls off. Two 1/4-20 threaded mounting points are included on the bottom of the housing for simple, rotation-free attachment of a tray and handle system. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts. The tray with dual quick-release handles # 9523.64 is the most popular choice for both handling and attachment of accessories. Setup The camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface. Confidence The unique rear seal design prevents accidental twisting or stretching of the o-ring for simple and confident assembly. We have eliminated the need for an o-ring groove or channel which can trap sand, dirt, or debris. Two double-passivated stainless steel locking lid snaps are simple to use and virtually unbreakable. The clear back allows you to see the o-ring form a solid, watertight seal as it closes. Vacuum testing A spare 1/2-20 threaded accessory port is provided on the side of the housing for easily installing the optional vacuum kit # 47012. A vacuum kit allows you to draw a vacuum on the housing to check for leaks before entering the water. Drawing a vacuum on the system also provides extra security at the water surface, especially important when using the housing in rough surf. Viewfinders The camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing. The LCD may be tilted during installation for more comfortable viewing underwater. Lighting Light is absorbed as it travels through even short distances underwater, making colors appear dull or monochromatic. To preserve the natural colors of your subject, it’s important to stay within arm’s reach—no more than 3-4 feet (1 meter). For best results, we recommend adding an external flash or high-powered constant-on light if you will be diving regularly below 15 feet (3 meters). This housing supports your choice of shooting strobes by electrical sync cord or fiber optic triggering. You can enjoy the fastest and most accurate TTL exposure on the market by adding the DL5 DS Link Canon TTL Converter Ikelite CT1 Hotshoe and B1A Bulkhead Kit # 46076 and a compatible Ikelite DS strobe. Exposure compensation can be added or subtracted in the camera. Reliable locking connectors between the hotshoe and bulkhead make it easy to install the optional TTL electronics or carry backup parts when traveling. The camera's built-in flash is suitable for firing an external strobe, but not for lighting a photo underwater. Two fiber optic ports are built into the front of the housing to attach fiber optic cords from most major manufacturers. A bright constant-on video light can be used instead of or in addition to a flash. A constant-on light is not as bright as a strobe flash. Constant-on lights provide added versatility because they can be used for focus assist and to improve colors when shooting video. A simple rule is that the brighter the better underwater. A high-quality lighting system can produce professional results. Port system Changing ports could not be simpler—just press the port on and tighten three thumb screws. Feel confident that the port is secure with simple parts you can trust in a remote location. This housing accepts ports from our DLM Port System to accommodate a selection of the best zoom, macro, and wide-angle lenses for underwater use. Our custom optical-grade acrylic domes provide color, clarity, and durability similar to glass at a fraction of travel weight and cost. Durability and corrosion-free performance Our white ABS-PC blend housing offers strength and corrosion-free performance with minimal maintenance. ABS-PC is lighter than aluminum for convenience during travel and less drag underwater. The specially formulated color deflects sunlight to keep your camera cooler longer. Compared to black or clear housings, the light color offers superior contrast for better viewing of the camera, LCD screen, and o-ring seal. Made in the USA Ikelite products are designed, built, and tested in the USA. We use high-quality materials sourced locally. Our housings are handcrafted and individually tested for fit and function. Every unit is pressure tested to 200 feet (60 meters). We support our products with over 50 years of experience and the best reputation for service in the diving industry. Compatibility The Canon EOS M6 (Mark I) camera is very similar in size and configuration. Differences in lens placement prevent the cameras from being used interchangeably in the same housing. This housing only fits the EOS M6 Mark II. This housing is only compatible with Canon cameras as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate additional grips, battery grips, eyepieces, LCD covers, or other accessories. 200 ft (60 m) depth rating Extendable shutter release lever Extendable AF-ON thumb button for back button focus Interchangeable Dry Lock Micro port system including flat ports, 6" dome ports, and 8" dome ports Corrosion-proof ABS-PC construction Clear view back with laser-engraved control markings Ergonomic, field-serviceable direct-drive controls Accessory ports for optional vacuum system and TTL converter Supports LCD tilt Made in the USA What's in the box: 200DLM / A Underwater Housing Rear O-Ring Front O-Ring 0.050" Hex Key 1/16" Hex Key Silicone Lubricant 1cc Tube