كريسي طقم البدء Cressi Start Package

From

2999

إذا كنت تبحث عن سترة BCD متينة وقوية ومضادة للرصاص أكثر من البداية فهي ما تبحث عنه. صُمِّمَت السترة الواقية بالكامل من السترات الواقية "Start full jacket BCD" بالفاتورة ، وهي مصنوعة من 500 قوي للغاية و 1000 منكرات Denier ، مع طفو ممتاز. مصممة مع الاستخدام المتطلب للتدريب على الغوص ومرافق الاستئجار في الاعتبار ، فإن هذه BCD ستمنح غواص الرياضة سنوات من الاستخدام الموثوق.


يحتوي BCD على ثلاثة صمامات تخفيف / تخفيف الضغط الزائد مع وجود اثنين من الكتفين على اليسار واليمين وصمام سفلي ثالث على الجانب الخلفي الأيمن لخلية الهواء. يمكن التخلص من الثلاثة يدويًا بحبال السحب والأخرى باستخدام آلية نفخ الطاقة. يوجد حلقتان بلاستيكيتان D وخطافان إضافيان لإرفاق الأدوات والملحقات. إذا تم استخدامه في مرافق الغوص ، يكون مؤشر الحجم مرئيًا للغاية على الكتف الأيمن.


يحتوي BCD على جيوب تخزين كبيرة ملحقة مع إقفال خطاف وحلقة ، وقد تم تجهيز أحزمة القص القابلة للضبط جنبًا إلى جنب مع كل من ضبط الجذع وشرائط الخصر بمشابك على شكل صدمات للإغلاق الجانبي لسهولة الارتداء والخلع. يتم تعليقه بشكل مستقل من خلية الهواء مما يسمح لخلية الهواء بالانتفاخ بعيدًا عن الغواص مما يمنع تأثير الضغط "عند النفخ. حقيبة الظهر صلبة لدعم واستقرار الأسطوانة لكنها مبطنة بالكامل للراحة. يأتي Cressi Start BCD مزودًا بخرطوم منخفض الضغط وسريع الفصل 3/8 بوصة ودليل المالك.


الطفو في: رطل. / كجم / الحجم

29.2 رطل. / 13.3 كجم / XS

31.5 رطل. / 14.3 كجم / ثانية

33.7 رطل. / 15.3 كجم / م

38.1 رطل. / 17.3 كجم / لتر

44.9 رطل. / 20.4 كجم / XL


إن XS2 / AC2 Regulator عبارة عن منظم تدفق غير متوازن يمكن الاعتماد عليه بشكل استثنائي وقد تم تصميمه من منظم المرحلة الأولى والذي يعد اختيارًا رائعًا باعتباره جهازًا جديدًا للغواص ، أو للاستخدام كنظام منظم لزجاجات المرحلة. سوف يوفر هذا التصميم البسيط والآمن للوقود الغاز حتى لو كان هناك فشل في المرحلة الأولى. تحتوي المرحلة الأولى على منفذ HP 7/16 "مترابط ، 4 منافذ LP 3/8" الخيوط ومصنوعة من النحاس الأصفر المطلي بالكروم لضمان العمر الطويل والمتانة. يتم استخدام مرشح مخروطي يحتوي على مساحة سطح أكبر لخصائص تدفق هواء أعلى من خلال منظم المرحلة الأولى.


يتكون غلاف المرحلة الثانية من طراز XS2 من بوليمرات عالية التقنية غير قابلة للتآكل ولديه آلية لصمام الطلب يمكن الاعتماد عليها. يتم توجيه تدفق الهواء إلى المعبرة عن طريق الحقن ، مما يخلق تأثير فنتوري يعزز الأداء. تأتي المرحلة الثانية مع تدفق تدفق يعمل على تأثير Venturi ، مع وظيفة ضبط الغوص / قبل الغوص. منظم يأتي مع الناطقة بلسان السيليكون مريحة. يزن منظم ضغط AC2 المضغوطة XS2 35 أونصة. (994 جم) مع الخرطوم ويأتي مع دليل المالك. منظم معتمد لمعايير EN250 / 2000 وصنع في إيطاليا.


XS الأخطبوط هو منظم المرحلة الثانية خفيف الوزن وعالي الأداء. يحتوي XS على مفتاح غوص / غطس فينتوري والذي سيساعد في التحكم في حساسية المنظم عندما لا يكون قيد الاستخدام ، ولكن عند التبديل من وضع الغطس إلى الغطس ، سيزداد أداء المنظمين على الفور. يحتوي XS Octopus على آلية يمكن الاعتماد عليها لصمام الطلب للحصول على أداء موثوق. تم تجهيز XS Octopus بخرطوم ملولب مقاس 33 "(84 سم) 3/8" ، ويحتوي على غطاء أمامي أصفر لسهولة التعرف عليه في حالة الطوارئ الجوية. تحتوي الجهة المنظمة على لسان حال ناعم ومريح للسيليكون ومصنع من بوليمرات عالية التقنية ومقاومة للصدمات. منظم يزن 7.27 أوقية. (206 جم) بدون خرطوم و 12.7 أوقية. (359 جم) بالخرطوم. منظم معتمد لمعايير الملحق B EN 250.2014. منظم هو الايطالية الصنع.


Cressi Mini-Console 2 هي وحدة تحكم صغيرة مدمجة تضم مقياس ضغط Cressi Mini-Manometer ومقياس عمق تناظري جديد وصغير. كلا المقياسين عبارة عن أدوات عالية الجودة مع حاويات نحاس مطلي بالكروم ، ومقياس العمق له وظيفة غشائية غشائية. كلا المقياس له مقياس دائري كبير سهل القراءة. توجد الأدوات في صندوق صغير على شكل وحدة تحكم حديثة ، مصنوع من البولي كربونات والديسموبان ، (مادة البولي يوريثين بالحرارة) ، وهما مواد تضمن الحماية من الصدمات والخدوش والتي ، في نفس الوقت ، خفيفة للغاية. في نهاية وحدة التحكم ، على الجانبين قليلاً ، توجد فتحتان لتثبيتها على BCD أو تسخيرها بمشبك أو حبل بحيث لا تتدلى مع خطر الإضرار بالبيئة أو الأدوات.


الوجه الانارة لمعيار العمق 230 '، أول 40' من قراءات العمق هي في 10 'زيادات ، (والتي تتوافق مع منطقة توقف الضغط) وتنتشر على نطاق واسع لسهولة القراءة. وللمراقبة السريعة للعمق ، يتم تقسيم الوجه إلى 3 مناطق ملونة مختلفة: الأخضر حتى 66 '، والأزرق الفاتح من 66' إلى 130 'والأحمر من 130' إلى نهاية المقياس. يحتوي الجهاز على مؤشر أقصى عمق يتوقف على الحد الأقصى للعمق الذي تم الوصول إليه أثناء الغوص. هذه الوظيفة مفيدة للغاية لتسجيل معلومات الغوص.


يقرأ الاتصال الهاتفي الانسيابي قياس الضغط مصغرة من 0 إلى 5000 رطل. ومثل مقياس العمق ، يتم تقسيم وجه الأدوات إلى ثلاث مناطق ملونة مختلفة للمراقبة السريعة للهواء ، حيث يتم تمييز المنطقة من 600 رطل / بوصة أو أقل باللون الأحمر بشريط صلب وخطوط حمراء. إذا تم استخدام المقياس على غطس أعمق ، فإن المقياس الأحمر يمتد ويتلاشى إلى 1300 رطل ، وهذا يوفر إشارة إضافية للهواء الاحتياطي مطلوبة عند أعماق أكبر. من 600 إلى حوالي 3000 رطل من اللون الأخضر ومن 3000 إلى نهاية الحجم باللون الأزرق.


العدسة الزجاجية الأمامية مصممة لتكون بمثابة صمام تخفيف الضغط. في حالة حدوث زيادة مفاجئة في الضغط داخل الجهاز ، يرتفع الزجاج قليلاً ، مما يسمح للضغط الزائد بالهروب. تم تجهيز مقياس الضغط بخرطوم عالي الضغط مقاس 7/16 بوصة. وحدة التحكم بالأدوات مصنوعة في إيطاليا.


If you're looking for a durable, strong and almost bulletproof BCD jacket than the Start is what you are looking for. Constructed from extremely Strong 500 and 1000-Denier Cordura, with excellent buoyancy, even on smaller sizes the Start full jacket BCD fits the bill. Designed with the demanding use of dive training and rental facilities in mind this BCD will give the sport diver years of dependable use.


The BCD has three over-pressure relief/dump valves with two located on the left and right shoulders and a third lower valve on the rear right of the air cell. All three can be manually dumped two with pull cords and the other with the power inflator mechanism. There are two plastic D-rings and two additional snap hooks for attachment of instruments and accessories. If used at dive facilities a size indicator is highly visible on the right shoulder.


BCD has two large accessory storage pockets with hook and loop closures, and the adjustable sternum straps along with both torso adjustment and waist straps are equipped with squeeze-style" side-release buckles for easy donning and doffing. The waist strap/cummerbund assembly is independently suspended from the air cell allowing the air cell to inflate away from the diver preventing the squeeze-effect" when inflated. The backpack is rigid for support and stability of the cylinder yet is fully padded for comfort. The Cressi Start BCD come with a 3/8" threaded quick-disconnect low-pressure hose and owner's manual.


Buoyancy in: lbs. / kg / size

29.2 lbs. / 13.3 kg / XS

31.5 lbs. / 14.3 kg / S

33.7 lbs. / 15.3 kg / M

38.1 lbs. /17.3 kg / L

44.9 lbs. / 20.4 kg /XL


The XS2/AC2 Regulator is an exceptionally dependable non-balanced flow-by-piston designed 1'st stage regulator that is a great choice as a new diver's rig, or for use as a stage bottle regulator system. This simple yet fail-safe design will deliver gas even if there is a first stage failure. The 1'st stage has 1 HP 7/16" threaded port, 4 LP 3/8" threaded ports and is made from marine grade chromed brass for long life and durability. A conical filter is used which has greater surface area for higher air flow characteristics through the 1'st stage regulator.


The XS2 Compact Second-Stage housing is made of durable non-corrosive hi-tech polymers and has a dependable downstream demand valve mechanism. The flow of air is channeled to the mouthpiece by injection, creating a venturi effect enhancing the performance. The 2'nd stage comes with a flow deviator that acts on the Venturi effect, with dive/pre-dive adjustment function. Regulator comes with a comfortable silicone mouthpiece. The XS2 Compact AC2 Regulator weighs 35 oz. (994 g) with the hose and comes with an owner's manual. Regulator is certified to EN250/2000 standards and is made in Italy.


The XS Octopus is a lightweight, high performance second stage regulator. The XS has a Venturi dive/pre-dive switch which will help control the sensitivity of the regulator when not in use, yet when switched from the pre-dive to dive position the regulators performance will instantly increase. The XS Octopus has a dependable downstream demand valve mechanism for reliable performance. The XS Octopus is equipped with a 33" (84 cm) 3/8" threaded hose, has a yellow front cover for easy identification in an out-of-air-emergency. The regulator has a soft and comfortable liquid silicone mouthpiece and the housing is made of durable impact resistant hi-tech polymers. The regulator weighs 7.27 oz. (206 g) without the hose and 12.7 oz. (359 g) with the hose. Regulator is certified to Annex B EN 250.2014 standards. Regulator is Italian made.


The Cressi Mini-Console 2 is a small compact console that houses the Cressi Mini-Manometer Pressure Gauge and a new, small, analog depth gauge. Both gauges are high-quality instruments with chrome plated brass cases and the depth gauge has a diaphragm membrane actuated function. Both gauges have a large circular easy-to-read scale. The instruments are housed in a small, modern shaped console boot, made from polycarbonate and desmopan, (a thermoplastic polyurethane) two materials that guarantee protection from shocks, scratches and which, at the same time, is very light. At the end of the console, slightly to the sides, there are two eyelets for fastening the instrument to the BCD or harness with a clip or lanyard so that it does not hang down with the risk of catching and damaging the environment or the instruments.


The luminescent face of the 230' depth gauge, the first 40' of depth readings are in 10' increments, (which correspond to the area of decompression stops) and are widely spaced for ease-of-reading. For at-a-glance monitoring of depth, the face is divided into 3-different colored zones: Green up to 66', light-blue from 66' to 130' and red from 130' to the end of the scale. The instrument has a maximum depth indicator that stops on the maximum depth reached during the dive. This function is extremely handy for logging of dive information.


The Mini-Manometer Pressure Gauge luminescent dial reads from 0 to 5000 psi. Like the depth gauge the instruments face is divided into three different colored zones for at-a-glance monitoring of air the area from 600 psi and below is highlighted in red with a solid bar and red stripes. If gauge is used on deeper dives, the red scale extends and fades to 1,300 psi, this provides for added reserve air indication required at greater depths. From 600 to approximately 3,000 psi is green and from 3,000 to end of scale is blue.


The front glass lens is made to act as a pressure relief valve. In the event of a sudden increase in pressure inside the instrument, the glass rises slightly, allowing the excess pressure to escape. Pressure gauge is equipped with a 7/16" threaded high-pressure hose. The instrument console is made in Italy.

SKU
594.2804
Attachments
From2999