The Scubapro S-Tek Pure is a simple but durable system consisting of a continuous webbing harness combined with a 3D formed stainless steel backplate and a donut wing. The stainless steel hardware includes a waist buckle, two pre-bent D-rings on the shoulders, one D-ring on the waist, and two D-rings on the crotch strap. The stainless steel backplate features Evo-Angle webbing slots for more natural webbing routing, increasing comfort and reducing webbing wear. The backplate also provides holes for trim weight system mounting, an argon tank mounting point for drysuit divers, 2 S-Tek Ergo Nuts, and a built-in comfortable carry handle. The system is available with a 30-pound / 13 kg, 40-pound / 18 kg, or 60-pound / 27 kg lift donut wing, with the 30-pound / 13 kg and 40-pound / 18 kg wings suitable for single tank diving, and the 40-pound / 18 kg and 60-pound / 27 kg wings for twin tank diving. The 30-pound / 13 kg system includes a single tank adapter. The S-Tek Pure is a rugged and reliable technical diving system designed for long deep dives. A continuous webbing harness offers a custom, personalized fit. It can be configured as a fixed-shoulder harness for simplicity or in extender mode, which allows shoulder straps to extend for easier donning and doffing. The stainless steel waist buckle allows full adjustment. Two pre-bent D-rings on the shoulders, one D-ring on the waist, and two D-rings on the crotch strap are provided for attaching additional gear. Branded silicone epaulette on the left shoulder and silicone guide bands keep the inflator hose and straps in place. The stainless steel backplate has Evo-Angle webbing slots and mounting points for trim weights, an argon tank for drysuit divers, and a built-in carry handle. 2 S-Tek Ergo Nuts, designed ergonomically for easy tightening and loosening, are flush-mounted to prevent wear. The donut wing (30 lbs / 13 kg, 40 lbs / 18 kg, or 60 lbs / 27 kg) is made of a 1000D Cordura outer shell and a 500D Cordura inner bladder. A single tank adapter is included with the 30 lb / 13 kg system. The backplate has fully radiused edges and a soft organic shape, along with a recessed wingnut socket, optimized hole count and placement, and webbing bolt hole alignment, making it a well-designed system.