طلب خاص
يشحن بشكل عام خلال 7 إلى 14 يوما ، حسب التوفر
Special Order
Generally ships in 7-14 days, subject to availability
يتطلب هذا السكن إضافة منفذ عدسة متوافق للتشغيل المقاوم للماء. منفذ العدسة غير متضمن.
معالجة رائعة
هذه الحزم المدمجة القوية في جميع ترقياتنا الأخيرة لعناصر التحكم وبيئة العمل. تم تحديث ذراع الغالق إلى تصميم منحني أكثر حساسية وطبيعية. تحضن أداة التحكم القياسية جانب الهيكل للاستخدام المريح عند الإمساك باليد. يمكن تمديده بسهولة باستخدام ملحق الزناد الاختياري رقم 4077.93 لجعله في متناول اليد عند استخدام مقبض التحرير السريع الأيمن. يتم الوصول إلى الزر (*) بواسطة رافعة موضوعة مباشرةً حيث يكون إبهامك للوصول السريع إلى زر الضغط القابل للتخصيص. يمكن أيضًا تمديد عنصر التحكم هذا باستخدام ملحق Shutter Trigger Extension # 4077.93. توجد عناصر التحكم التي يتم الوصول إليها في كثير من الأحيان في نفس التكوين الموجود على الكاميرا لتكرار ذاكرة العضلات والألفة التي طورتها بالكاميرا على السطح.
• عمق 200 قدم (60 م)
• تركيب منفذ DLM من النوع A.
• ضوابط لجميع وظائف الكاميرا الهامة. لا تتوفر عناصر التحكم في قرص التحكم أو زر Wi-Fi أو مفتاح الفلاش ؛ يمكن الوصول إلى معظم ميزات Control Dial باستخدام الأزرار لأعلى / لأسفل / لليسار / لليمين ؛ في حالة استخدام ستروب من الألياف الضوئية ، يجب تمديد الفلاش قبل التثبيت في الهيكل
• موصل حاجز فلاش Ikelite مزود بدائرة TTL مدمجة
• حاملتا درج ملولب مقاس 1/4-20 بمسافة 3 بوصات (76 مم)
• طفو سلبي قليلاً في المياه العذبة
• يختلف الطفو الفعلي حسب اختيار العدسة والمنفذ
تم إعادة تصميم أزرار الضغط لتقليل الوزن وتراكم الملح. زر بدء / إيقاف تسجيل الفيديو باللون الأحمر الفاتح بأكسيد الألومنيوم بحيث لا يفوتك الحدث أبدًا. يتميز الجزء الخلفي من الغلاف برموز تحكم محفورة بالليزر لن تتلاشى أو تسقط أبدًا. يتم تحميل حامل الكاميرا من الأمام لسهولة التركيب والإزالة. لوحة تثبيت صغيرة تُثبَّت بأسفل الكاميرا وتُثبَّت في مقدمة الهيكل. لا تحتاج لوحة تركيب الكاميرا إلى إزالتها من الكاميرا لاستخدامها على السطح أو عند تغيير البطارية أو بطاقات الذاكرة. تتميز لوحة التركيب بحامل ملولب 1/4-20 في الجزء السفلي بحيث يمكن توصيله بحامل ثلاثي القوائم على السطح.
يمنع تصميم الختم الخلفي الفريد الالتواء أو التمدد العرضي للحلقة o لتجميع بسيط وواثق. لقد ألغينا الحاجة إلى أخدود أو قناة دائرية يمكن أن تحبس الرمال أو الأوساخ أو الحطام. اثنين من أغطية قفل الفولاذ المقاوم للصدأ مزدوجة التخميل سهلة الاستخدام وغير قابلة للكسر تقريبًا. يسمح لك الجزء الخلفي الشفاف برؤية الحلقة على شكل حلقة صلبة مانعة لتسرب الماء عند غلقها. يتم توفير منفذ ملحق ملولب احتياطي 1 / 2-20 على جانب السكن للتثبيت السهل لمجموعة الفراغ الاختيارية # 47012. تسمح لك مجموعة الفراغ بالضغط على الهيكل للتحقق من التجميع المناسب قبل دخول الماء. يمكن رؤية شاشة LCD الكبيرة فائقة السطوع في الكاميرا من الحافة إلى الحافة من خلال الجزء الخلفي من الغلاف.
تعرض حقيقي لـ TTL
يُمتص الضوء أثناء انتقاله عبر مسافات قصيرة تحت الماء ، مما يجعل الألوان تبدو باهتة أو أحادية اللون. للحفاظ على الألوان الطبيعية لموضوعك ، من المهم أن تظل في متناول يدك - لا يبعد أكثر من 3 إلى 4 أقدام (1 متر). تم ضبط دائرة TTL المدمجة بدقة على بروتوكول التعرض للفلاش Canon EOS M6 للحصول على أدق تعريض ممكن. يتم تشغيل الدائرة بواسطة ستروب بدون صيانة ولا تغيير البطاريات. يتم دعم تعويض التعريض الضوئي في وضع TTL باستخدام عنصر التحكم المدمج في الكاميرا. في هذا الوقت ، يمكن فقط لمصابيح Ikelite DS القوية تشغيل الدوائر. ستظل المصابيح الوامضة SEA & SEA و INON و Nikonos تتمتع بأوقات إعادة التدوير السريعة وعمر البطارية المحسّن ، ولكن يجب استخدامها في أوضاع التعريض اليدوي فقط.
يوفر هذا الغلاف توصيلًا كهربائيًا مباشرًا بمنفذ الفلاش الخارجي الساخن للكاميرا. يعد توصيل السلك سهلاً مثل ربط المصباح الكهربائي ، كما أن التثبيت الملولب يمنع الانفصال العرضي أثناء الاستخدام. تم نقل وصلة الحاجز إلى الجزء العلوي من السكن لإبعاد الأسلاك عن طريقك وتقليل الضغط على أطراف السلك. تتوفر مجموعة متنوعة من نهايات أسلاك المزامنة لمصابيح Ikelite أو SEA & SEA أو INON أو Nikonos للحصول على تنوع مطلق. الفلاش الداخلي بالكاميرا مناسب لإطلاق ضوء ضوئي خارجي ، ولكن ليس لإضاءة صورة تحت الماء. تم بناء منفذي الألياف الضوئية في الجزء الأمامي من الغلاف لتوفير نقطة ربط لأسلاك الألياف الضوئية من معظم الشركات المصنعة الكبرى. يتطلب استخدام موصل الألياف الضوئية تشغيل الفلاش المدمج في الكاميرا ، مما يقلل من عمر البطارية ويتجاوز وظيفة TTL في الغلاف.
يمكن استخدام ضوء فيديو ساطع ثابت التشغيل بدلاً من الفلاش أو بالإضافة إليه. الضوء الثابت ليس ساطعًا مثل الفلاش الوامض. توفر الأضواء الثابتة تنوعًا إضافيًا لأنه يمكن استخدامها لمساعدة التركيز ولتحسين الألوان عند تصوير الفيديو. يتم تضمين نقطتي تركيب ملولبتين 1/4-20 في الجزء السفلي من الغلاف لتركيب نظام الدرج والمقبض. توفر المقابض بيئة عمل مُحسّنة تحت الماء وهي الأساس لحوامل الإضاءة الخاصة بك. هناك قاعدة بسيطة مفادها أن الأكثر إشراقًا هو الأفضل تحت الماء. يمكن أن ينتج عن نظام الإضاءة عالي الجودة نتائج بجودة المجلات باستخدام أي نظام كاميرا تقريبًا.
دعم العدسة الذي تريده
لا يمكن أن يكون تغيير المنافذ أكثر بساطة من هذا النظام - فقط اضغط على المنفذ وشد ثلاثة براغي للإبهام. اشعر بالتعزيز الإيجابي بأن المنفذ آمن بأجزاء بسيطة يمكنك الوثوق بها في مكان بعيد. يقبل هذا السكن مجموعة متنوعة من المنافذ من نظام منفذ DLM الخاص بنا لاستيعاب جميع عدسات التكبير والتصغير والزاوية الواسعة الأكثر شيوعًا. توفر مكونات القباب المصنوعة من الأكريليك البصري المخصص لدينا اللون والوضوح والمتانة للزجاج بجزء بسيط من وزن السفر والتكلفة.
المتانة والأداء الخالي من التآكل
يوفر غلاف مزيج ABS-PC الأبيض الجديد قوة وأداء خالٍ من التآكل مع الحد الأدنى من الصيانة. يحرف اللون المصمم خصيصًا أشعة الشمس للحفاظ على برودة الكاميرا لفترة أطول. بالمقارنة مع العلب السوداء أو الشفافة ، يوفر لون الضوء تباينًا فائقًا لعرض محسن للكاميرا وشاشة LCD وختم دائري. تم تصميم منتجات Ikelite وتصنيعها واختبارها في الولايات المتحدة الأمريكية. نحن نستخدم مواد عالية الجودة من مصادر محلية. يتم تصنيع العلب الخاصة بنا يدويًا واختبارها بشكل فردي من حيث الملاءمة والوظيفة. تم اختبار ضغط كل وحدة حتى 200 قدم (60 مترًا). ندعم منتجاتنا بأكثر من 50 عامًا من الخبرة وأفضل سمعة للخدمة في صناعة الغوص.
توافق الكاميرا
تم تصميم هذا السكن للاستخدام مع كاميرا Canon EOS M6. لسنا على علم بأي طرازات كاميرا أخرى يمكن استخدامها أو تكييفها مع هذا السكن المحدد.
توافق ستروب
متطلبات الرقم التسلسلي
• AF35: غير متوافق
• DS50: نعم ، فوق الرقم التسلسلي 70000
• DS51: نعم
• DS125: نعم ، فوق الرقم التسلسلي 5000
• DS160 ، DS161: نعم
• DS200: نعم ، أعلى الرقم التسلسلي 7163
التوافق مع سلك المزامنة الكهربائية
• سلك مزامنة TTL من Ikelite-to-Ikelite (TTL)
• سلك مزامنة مزدوج من Ikelite-to-Ikelite TTL (TTL)
• SEA & SEA / INON Strobe-to-Ikelite Non-TTL Sync Cord (يدوي)
• SEA & SEA / INON Strobe-to-Ikelite Non-TTL Dual Sync Cord (يدوي)
• سلك مزامنة Nikonos SB Strobe-to-Ikelite Non-TTL (يدوي)
• سلك مزامنة Nikonos SB Strobe-to-Ikelite Non-TTL (يدوي)
ماذا في الصندوق:
- Ikelite 200DLM / A مبيت تحت الماء
- السكن حلقة خلفية
- الإسكان حلقة امامية
- غطاء الحاجز للماء
- مجموعة التحكم + زر الضغط
- مفتاح سداسي عشري 1/8 بوصة
- شحم
This housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.
Superb handling
This powerful compact housing packs in all of our latest upgrades to controls and ergonomics. The shutter lever has been updated to a more sensitive and natural feeling curved design. The standard control hugs the side of the housing for comfortable use when hand holding. It can be easily extended using the optional Shutter Trigger Extension # 4077.93 to put it within easy reach when using a right-hand quick release handle. The (*) button is accessed by a lever placed right where your thumb is for quick access to this customizable push button. This control may also be extended using the Shutter Trigger Extension # 4077.93. Less often accessed controls are located in the same configuration as on the camera to replicate the muscle memory and familiarity you've developed with your camera on the surface.
• 200 ft (60m) depth rating
• DLM Type A port mount
• Controls for all important camera functions; controls are not provided for Control Dial, Wi-Fi Button or Flash Switch; Most Control Dial features may be accessed using the up/down/left/right buttons; If using a fiber optic strobe, the flash must be extended prior to installing in the housing
• Ikelite flash bulkhead connector with built-in TTL circuitry
• Two 1/4-20 threaded tray mounts with 3-inch (76mm) spacing
• Slightly negative buoyancy in fresh water
• Actual buoyancy varies depending on choice of lens and port
Our push buttons have been redesigned to reduce weight and salt build-up. The video record start/stop button is bright red anodized so that you never miss the action. The back of the housing features laser engraved control symbols which will never fade or fall off. The camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.
The unique rear seal design prevents accidental twisting or stretching of the o-ring for simple and confident assembly. We have eliminated the need for an o-ring groove or channel which can trap sand, dirt or debris. Two double-passivated stainless steel locking lid snaps are simple to use and virtually unbreakable. The clear back allows you to see the o-ring form a solid, watertight seal as it closes. A spare 1/2-20 threaded accessory port is provided on the side of the housing for easily installation of the optional Vacuum Kit # 47012. A vacuum kit allows you to pressurize the housing to check for proper assembly prior to entering the water. The camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing.
True TTL exposure
Light is absorbed as it travels through even short distances underwater, making colors appear dull or monochromatic. To preserve the natural colors of your subject, it's important to stay within arm's reach-no more than 3-4 feet (1m) away. An integrated TTL circuit is fine-tuned to the Canon EOS M6 flash exposure protocol for the most accurate exposure possible. The circuit is powered by the strobe for zero maintenance and no batteries to change. Exposure compensation in TTL mode is supported using the camera's built-in control. At this time, only Ikelite DS strobes are capable of powering the circuitry. SEA&SEA, INON and Nikonos strobes will still enjoy fast recycle times and improved battery life, but must be used in manual exposure modes only.
This housing provides a direct electrical connection to the camera's external flash hot shoe. Cord attachment is as easy as screwing in a light bulb and the threaded fit prevents accidental detachment during use. The bulkhead connection has been moved to the top of the housing to keep cords out of your way and reduce strain on the cord ends. A variety of sync cord terminations are available for Ikelite, SEA&SEA, INON or Nikonos strobes for ultimate versatility. The camera's built-in flash is suitable for firing an external strobe, but not for lighting a photo underwater. Two fiber optic ports are built into the front of the housing provide an attachment point for fiber optic cords from most major manufacturers. Use of a fiber optic connector requires the camera's built-in flash to fire, reducing battery life and bypassing the TTL functionality of the housing.
A bright constant-on video light can be used instead of or in addition to a flash. A constant-on light is not as bright as a strobe flash. Constant-on lights do provide added versatility because they can be used for focus assist and for improved colors when shooting video. Two 1/4-20 threaded mounting points are included on the bottom of the housing for the attachment of a tray and handle system. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts. There is a simple rule that brighter is better underwater. A high-quality lighting system can produce magazine quality results with almost any camera system.
The Lens Support You Want
It couldn't be more simple to change ports than this system-just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure with simple parts you can trust in a remote location. This housing accepts a variety of ports from our DLM Port System to accommodate all of the most popular zoom, macro and wide angle lenses. Our custom optical grade acrylic domes components provide the color, clarity and durability of glass at a fraction of the travel weight and cost.
Durability and corrosion free performance
Our new white ABS-PC blend housing provides strength and corrosion free performance year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light color provides superior contrast for enhanced view of the camera, LCD screen and o-ring seal. Ikelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit and function. Every unit is water pressure tested to 200 feet (60m). We back our products with over 50 years of experience and the best reputation for service within the dive industry.
Camera Compatibility
This housing is designed for use with the Canon EOS M6 camera. We are not aware of any other camera models which may be used in or adapted to this particular housing.
Strobe Compatibility
Serial number requirements
• AF35: not compatible
• DS50: yes, above serial number 70000
• DS51: yes
• DS125: yes, above serial number 5000
• DS160, DS161: yes
• DS200: yes, above serial number 7163
Electrical sync cord compatibility
• Ikelite-to-Ikelite TTL Sync Cord (TTL)
• Ikelite-to-Ikelite TTL Dual Sync Cord (TTL)
• SEA&SEA / INON Strobe-to-Ikelite Non-TTL Sync Cord (Manual)
• SEA&SEA / INON Strobe-to-Ikelite Non-TTL Dual Sync Cord (Manual)
• Nikonos SB Strobe-to-Ikelite Non-TTL Sync Cord (Manual)
• Nikonos SB Strobe-to-Ikelite Non-TTL Sync Cord (Manual)
What's in the box:
Ikelite 200DLM/A Underwater Housing
Housing Rear O-Ring
Housing Front O-Ring
Waterproof Bulkhead Cap
Control + Push Button Tip Assortment
1/8 " Hex Key
Lubricant