طلب خاص
يشحن بشكل عام خلال 7 إلى 14 يوما ، حسب التوفر
Special Order
Generally ships in 7-14 days, subject to availability
يتطلب هذا السكن إضافة منفذ عدسة متوافق للتشغيل المقاوم للماء. منفذ العدسة غير متضمن.
يعتبر 200DLM / A Underwater Housing الرفيق المثالي الذي يسمح باستخدام كاميرات Canon EOS M6 Mark II غير المزودة بمرآة في الماء أو حوله للغوص أو الغطس أو ركوب الأمواج أو المسبح أو أي مغامرة.
كانون EOS M6 Mark II
للوهلة الأولى ، قد تبدو كاميرا Canon EOS M6 II مشابهة لكاميرا M6 الأصلية ، لكنها مختلفة جسديًا من الداخل والخارج. تحتوي كاميرا EOS M6 II على مستشعر APS-C CMOS بدقة 32.5 ميجابكسل مع تركيز بؤري تلقائي ثنائي البكسل. على عكس سابقتها ، فقد انضمت إلى العصر الحديث وهي تدعم الآن تسجيل الفيديو بدقة 4K UHD بمعدل 30p أو 25p.
بيئة العمل والتعامل
تعتبر بيئة العمل الجيدة أمرًا بالغ الأهمية عندما تحتاج إلى التركيز على التركيب والتركيز والتعرض المناسب. تضع أذرع التحكم الكبيرة والمنحنية عناصر التحكم الأكثر أهمية في المكان الذي تحتاج إليه: الغالق والتركيز البؤري التلقائي (عبر زر AF / MF). يسمح لك هذا المزيج بالتصوير مع التركيز على الزر الخلفي أو بدونه ، وهي تقنية متقدمة مفيدة لمعالجة التركيز البؤري الحاد للأهداف فائقة السرعة والأهداف سريعة الحركة. يمكن تمديد كل ذراع باستخدام ملحق Shutter Trigger الاختياري رقم 4077.95 للمسافة المثالية عند استخدام المقبض الأيمن.
يتم تشغيل كل من قرص التحكم وعجلة التحكم الخلفية وقرص الوضع والقوة وأدوات التحكم في تحرير العدسة بشكل حدسي عبر مقابض فائقة الجودة ناعمة الملمس. تعتبر أدوات التحكم في الدوران من الفولاذ المقاوم للصدأ والدوران المباشر آمنة من الفشل تقريبًا ويمكن للمستخدم صيانتها وتعديلها في لمح البصر.
يمكن الوصول إلى جميع أزرار الكاميرا الخلفية من خلال العمل السلس وأزرار الضغط المصنوعة من الألومنيوم المؤكسد الصلب للحصول على أداء موثوق به وسهولة الصيانة. يتم تمييز عناصر التحكم هذه بشكل واضح بواسطة النقش بالليزر على الجزء الخلفي من الغلاف الذي لا يتلاشى أو يسقط أبدًا.
يتم تضمين نقطتي تركيب ملولبتين 1/4-20 في الجزء السفلي من الغلاف لتركيب درج ونظام مقبض بسيط وخالي من الدوران. توفر المقابض بيئة عمل مُحسّنة تحت الماء وهي الأساس لحوامل الإضاءة الخاصة بك. الدرج مع مقابض التحرير السريع المزدوجة # 9523.64 هو الخيار الأكثر شيوعًا للتعامل مع الملحقات وإرفاقها.
اقامة
يتم تحميل حامل الكاميرا من الأمام لسهولة التركيب والإزالة. لوحة تثبيت صغيرة تُثبَّت بأسفل الكاميرا وتُثبَّت في مقدمة الهيكل. لا تحتاج لوحة تركيب الكاميرا إلى إزالتها من الكاميرا لاستخدامها على السطح أو عند تغيير البطارية أو بطاقات الذاكرة. تتميز لوحة التركيب بحامل ملولب 1/4-20 في الجزء السفلي بحيث يمكن توصيله بحامل ثلاثي القوائم على السطح.
ثقة
يمنع تصميم الختم الخلفي الفريد الالتواء أو التمدد العرضي للحلقة o لتجميع بسيط وواثق. لقد ألغينا الحاجة إلى أخدود أو قناة دائرية يمكن أن تحبس الرمال أو الأوساخ أو الحطام. اثنين من أغطية قفل الفولاذ المقاوم للصدأ مزدوجة التخميل سهلة الاستخدام وغير قابلة للكسر تقريبًا. يسمح لك الجزء الخلفي الشفاف برؤية الحلقة على شكل حلقة صلبة مانعة لتسرب الماء عند غلقها.
اختبار الفراغ
يتم توفير منفذ ملحق ملولب احتياطي 1 / 2-20 على جانب السكن لسهولة تركيب مجموعة الفراغ الاختيارية # 47012. تسمح لك مجموعة الفراغ بسحب فراغ على الهيكل للتحقق من وجود تسرب قبل دخول الماء .
يوفر أيضًا سحب فراغ على النظام أمانًا إضافيًا على سطح الماء ، وهو أمر مهم بشكل خاص عند استخدام الغلاف في الأمواج الخشنة.
محددات الرؤية
يمكن رؤية شاشة LCD الكبيرة فائقة السطوع في الكاميرا من الحافة إلى الحافة من خلال الجزء الخلفي من الغلاف. يمكن إمالة شاشة LCD أثناء التثبيت للحصول على رؤية أكثر راحة تحت الماء.
إضاءة
يُمتص الضوء أثناء انتقاله عبر مسافات قصيرة تحت الماء ، مما يجعل الألوان تبدو باهتة أو أحادية اللون. للحفاظ على الألوان الطبيعية لموضوعك ، من المهم أن تظل في متناول يدك - لا يبعد أكثر من 3 إلى 4 أقدام (1 متر). للحصول على أفضل النتائج ، نوصي بإضافة وميض خارجي أو ضوء ثابت عالي الطاقة إذا كنت ستغطس بانتظام أقل من 15 بوصة (3 أمتار).
يدعم هذا السكن اختيارك لإطلاق النار الوامضة عن طريق سلك المزامنة الكهربائية أو تشغيل الألياف البصرية. يمكنك الاستمتاع بالتعرض الأسرع والأكثر دقة لـ TTL في السوق عن طريق إضافة DL5 DS Link Canon TTL Converter Ikelite CT1 Hotshoe و B1A Bulkhead Kit # 46076 و a متوافق مع Ikelite DS ستروب. يمكن استخدام تعويض التعريض الضوئي مضافًا أو مطروحًا في الكاميرا. تسهّل موصلات القفل الموثوقة بين أداة التثبيت السريع والحاجز تثبيت إلكترونيات TTL الاختيارية أو حمل الأجزاء الاحتياطية عند السفر.
الفلاش الداخلي بالكاميرا مناسب لإطلاق ضوء ضوئي خارجي ، ولكن ليس لإضاءة صورة تحت الماء. تم بناء منفذي الألياف الضوئية في الجزء الأمامي من الغلاف لتوفير نقطة ربط لأسلاك الألياف الضوئية من معظم الشركات المصنعة الكبرى.
يمكن استخدام ضوء فيديو ساطع ثابت التشغيل بدلاً من الفلاش أو بالإضافة إليه. الضوء الثابت ليس ساطعًا مثل الفلاش الوامض. توفر الأضواء الثابتة تنوعًا إضافيًا لأنه يمكن استخدامها لمساعدة التركيز ولتحسين الألوان عند تصوير الفيديو.
هناك قاعدة بسيطة مفادها أن الأكثر إشراقًا هو الأفضل تحت الماء. يمكن أن ينتج عن نظام الإضاءة عالي الجودة نتائج احترافية عالية الجودة.
نظام المنفذ
لا يمكن أن يكون تغيير المنافذ أكثر بساطة من هذا النظام - فقط اضغط على المنفذ وشد ثلاثة براغي للإبهام. اشعر بالتعزيز الإيجابي بأن المنفذ آمن بأجزاء بسيطة يمكنك الوثوق بها في مكان بعيد.
يقبل هذا السكن منافذ من نظام منفذ DLM الخاص بنا لاستيعاب مجموعة مختارة من أفضل عدسات التكبير والتصغير والزاوية الواسعة للاستخدام تحت الماء. توفر مكونات القباب المصنوعة من الأكريليك البصري المخصص لدينا اللون والوضوح والمتانة للزجاج بجزء بسيط من وزن السفر والتكلفة.
المتانة والأداء الخالي من التآكل
يوفر غلاف مزيج ABS-PC الأبيض الخاص بنا قوة وأداء خالٍ من التآكل مع الحد الأدنى من الصيانة. ABS-PC أخف من الألومنيوم للراحة أثناء السفر وأقل جرًا تحت الماء. يحرف اللون المصمم خصيصًا أشعة الشمس للحفاظ على برودة الكاميرا لفترة أطول. بالمقارنة مع العلب السوداء أو الشفافة ، يوفر لون الضوء تباينًا فائقًا لعرض محسن للكاميرا وشاشة LCD وختم دائري.
صنع فى أمريكا
تم تصميم منتجات Ikelite وتصنيعها واختبارها في الولايات المتحدة الأمريكية. نحن نستخدم مواد عالية الجودة من مصادر محلية. يتم تصنيع العلب الخاصة بنا يدويًا واختبارها بشكل فردي من حيث الملاءمة والوظيفة. تم اختبار ضغط كل وحدة حتى 200 قدم (60 مترًا). ندعم منتجاتنا بأكثر من 50 عامًا من الخبرة وأفضل سمعة للخدمة في صناعة الغوص.
التوافق
كاميرا Canon EOS M6 (Mark I) متشابهة جدًا في الحجم والتكوين. تمنع الاختلافات في وضع العدسة من استخدام الكاميرا بالتبادل في نفس السكن. يستوعب هذا السكن كاميرا EOS M6 Mark II فقط.
هذا الغلاف متوافق فقط مع كاميرات Canon كما تم شحنها من قبل الشركة المصنعة. ما لم يُذكر خلاف ذلك ، فإن هذا الغلاف لا يستوعب استخدام المقابض الإضافية ، أو مقابض البطارية ، أو العدسات ، أو أغطية شاشات الكريستال السائل ، أو غيرها من الملحقات.
200 قدم (60 م) تصنيف العمق
ذراع تحرير مصراع قابل للتمديد
ذراع إبهام لزر AF-ON قابل للتمديد للتركيز على الزر الخلفي
نظام المنافذ الصغيرة ذات القفل الجاف القابل للتبديل بما في ذلك المنافذ المسطحة ومنافذ القبة 6 بوصات ومنافذ القبة 8 بوصات
هيكل ABS-PC مقاوم للتآكل
رؤية واضحة للخلف مع علامات تحكم محفورة بالليزر
أدوات تحكم بالدفع المباشر مريحة وصالحة للخدمة الميدانية
منافذ الملحقات لنظام التفريغ الاختياري ومحول TTL
يدعم إمالة شاشة LCD
صنع في الولايات المتحدة الأمريكية
ماذا في الصندوق:
- 200DLM / A تحت الماء
- حلقة O الخلفية
- الجبهة يا الدائري
- 0.050 "مفتاح سداسي
- مفتاح سداسي عشري 1/16 بوصة
- سيليكون أنبوب 1cc زيوت التشحيم
This housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.
The 200DLM/A Underwater Housing is the perfect companion allowing use of the Canon EOS M6 Mark II mirrorless cameras in or around the water for scuba, snorkeling, surf, pool, or any adventure.
Canon EOS M6 Mark II
At first glance the Canon EOS M6 II may seem similar to the original M6 camera, but it is physically different both inside and out. The EOS M6 II has an all new 32.5MP APS-C CMOS sensor with Dual Pixel AF. Unlike its predecessor it has joined the modern times and now supports 4K UHD video recording at either 30p or 25p.
Ergonomics and handling
Good ergonomics are critical when you need to concentrate on composition, focus, and proper exposure. Large, curved control levers put the most important controls right where you need them: shutter and autofocus (via the AF/MF button). This combination allows you to shoot with or without back button focus, an advanced technique that is useful for tack sharp focus of super macro and fast moving subjects. Each lever can be extended using the optional Shutter Trigger Extension # 4077.95 for perfect spacing when using a right-hand handle.
The control dial, rear control wheel, mode dial, power, and lens release controls are all operated intuitively via premium soft-touch knobs. Stainless steel, direct-drive rotating controls are virtually fail-safe and user serviceable and adjustable in a pinch.
All rear camera buttons are accessible by smooth action, hard anodized aluminum push buttons for reliable performance and easy maintenance. These controls are clearly labeled by laser engraving on the back of the housing that never fades or falls off.
Two 1/4-20 threaded mounting points are included on the bottom of the housing for simple, rotation-free attachment of a tray and handle system. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts. The Tray with Dual Quick Release Handles # 9523.64 is the most popular choice for both handling and attachment of accessories.
Set-Up
The camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.
Confidence
The unique rear seal design prevents accidental twisting or stretching of the o-ring for simple and confident assembly. We have eliminated the need for an o-ring groove or channel which can trap sand, dirt, or debris. Two double-passivated stainless steel locking lid snaps are simple to use and virtually unbreakable. The clear back allows you to see the o-ring form a solid, watertight seal as it closes.
Vacuum Testing
A spare 1/2-20 threaded accessory port is provided on the side of the housing for easily installation of the optional Vacuum Kit # 47012. A vacuum kit allows you to draw a vacuum on the housing to check for leaks prior to entering the water.
Drawing a vacuum on the system also provides extra security at the surface of the water, especially important when using the housing in rough surf.
Viewfinders
The camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing. The LCD may be tilted during installation for more comfortable viewing underwater.
Lighting
Light is absorbed as it travels through even short distances underwater, making colors appear dull or monochromatic. To preserve the natural colors of your subject, it's important to stay within arm's reach-no more than 3-4 feet (1m) away. For the best results, we recommend adding an external flash or high-powered constant-on light if you'll be diving regularly below 15' (3m).
This housing supports your choice of shooting strobes by electrical sync cord or fiber optic triggering.You can enjoy the fastest and most accurate TTL exposure on the market by adding the DL5 DS Link Canon TTL Converter Ikelite CT1 Hotshoe and B1A Bulkhead Kit # 46076 and a compatible Ikelite DS strobe. Exposure compensation may be used added or subtracted in the camera. Reliable locking connectors between the hotshoe and bulkhead make it easy to install the optional TTL electronics or carry back up parts when traveling.
The camera's built-in flash is suitable for firing an external strobe, but not for lighting a photo underwater. Two fiber optic ports are built into the front of the housing provide an attachment point for fiber optic cords from most major manufacturers.
A bright constant-on video light can be used instead of or in addition to a flash. A constant-on light is not as bright as a strobe flash. Constant-on lights do provide added versatility because they can be used for focus assist and for improved colors when shooting video.
There is a simple rule that brighter is better underwater. A high-quality lighting system can produce professional quality results.
Port System
It couldn't be more simple to change ports than this system-just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure with simple parts you can trust in a remote location.
This housing accepts ports from our DLM Port System to accommodate a selection of the best zoom, macro, and wide angle lenses for underwater use. Our custom optical grade acrylic domes components provide the color, clarity, and durability of glass at a fraction of the travel weight and cost.
Durability and corrosion free performance
Our white ABS-PC blend housing provides strength and corrosion free performance year with minimal maintenance. ABS-PC is lighter than aluminum for convenience during travel and less drag underwater. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light color provides superior contrast for enhanced view of the camera, LCD screen, and o-ring seal.
Made in USA
Ikelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit and function. Every unit is water pressure tested to 200 feet (60m). We back our products with over 50 years of experience and the best reputation for service within the dive industry.
Compatibility
The Canon EOS M6 (Mark I) camera is very similar in size and configuration. Differences in lens placement prevent the camera from being used interchangeably in the same housing. This housing only accommodates the EOS M6 Mark II camera.
This housing is only compatible with the Canon cameras as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.
- 200 ft (60m) depth rating
- Extendable shutter release lever
- Extendable AF-ON button thumb lever for back button focus
- Interchangeable Dry Lock Micro port system including flat ports, 6"dome ports, and 8" dome ports
- Corrosion-proof ABS-PC construction
- Clear view back with laser engraved control markings
- Ergonomic, field serviceable direct-drive controls
- Accessory ports for optional vacuum system and TTL converter
- Supports LCD tilt
- Made in the USA
What's in the box:
- 200DLM/A Underwater Housing
- Rear O-Ring
- Front O-Ring
- 0.050" Hex Key
- 1/16" Hex Key
- Silicone Lubricant 1cc Tube
