سكوبابرو نظام اس-تك بيور Scubapro S-Tek Pure System

3438

5149

يعد سكوبابرو اس-تك بيور نظامًا بسيطًا ولكنه متين يتكون من حزام شبكة مستمر متعاون مع لوحة خلفية ثلاثية الأبعاد مصنوعة من الفولاذ المقاوم للصدأ وجناح دونات.

تشتمل الأجهزة المصنوعة من الفولاذ المقاوم للصدأ على مشبك للخصر ، وحلقتين على شكل حرف D مثبتتين مسبقًا على الكتفين ، وحلقة D واحدة على الخصر ، وحلقتين على شكل D على حزام المنشعب. تأتي اللوح الخلفي المصنوع من الفولاذ المقاوم للصدأ مع فتحات حزام Evo-Angle لتوجيه حزام أكثر طبيعية مما يزيد من الراحة ويقلل من تآكل الحزام. يوفر اللوح الخلفي أيضًا ثقوبًا لتركيب نظام وزن القطع ، ونقطة تثبيت خزان الأرجون للغواصين ذوي البدلة الجافة ، وصواميل 2 × S-Tek Ergo ، بالإضافة إلى مقبض حمل مدمج مريح.

يتوفر النظام بجناح دونات رفع 30 رطلاً / 13 كجم أو 40 رطلاً / 18 كجم أو 60 رطلاً / 27 كجم ، مع أجنحة 30 رطلاً / 13 كجم و 40 رطلاً / 18 كجم مناسبة للغوص في الخزان الفردي والأجنحة 40 رطلاً / 18 كجم و 60 رطلاً / 27 كجم للغوص باسطوانتين مزدوجة. يشتمل نظام 30 رطلاً / 13 كجم على محول اسطوانة واحد.

اس-تك بيور عبارة عن نظام غوص تقني متين وموثوق مصمم لتلك الرحلات الطويلة في الأعماق.


  • يوفر حزام حزام مستمر ملاءمة مخصصة وفردية.
  • يمكن تهيئته كحزام طول كتف ثابت للحصول على بساطة مطلقة ، أو في وضع الموسع ، والذي يسمح بتمديد أحزمة الكتف لسهولة الارتداء والخلع.
  • يسمح مشبك الخصر المصنوع من الفولاذ المقاوم للصدأ بمجموعة كاملة من التعديلات.
  • يتم توفير حلقتين D مثنيتين مسبقًا على الكتفين ، وحلقة D واحدة على الخصر ، وحلقتين على شكل D على حزام المنشعب للتثبيت على ترس إضافي.
  • كتاف سيليكون على الكتف الأيسر وشرائط توجيه سيليكون تحمل علامة تجارية تحافظ على خرطوم نفخ وأشرطة في مكانها.
  • توفر اللوحة الخلفية المصنوعة من الفولاذ المقاوم للصدأ فتحات حزام Evo-Angle بالإضافة إلى نقاط تثبيت لأوزان القطع ، وخزان أرجون للغواصين ذوي البدلة الجافة ، بالإضافة إلى مقبض حمل مدمج مريح.
  • 2 × صواميل S-Tek Ergo - مصممة هندسيًا ، وسهلة الشد والفك ، ومثبتة بشكل متدفق لمنع التآكل.
  • جناح الدونات (30 رطلاً / 13 كجم ، 40 رطلاً / 18 كجم أو 60 رطلاً / 27 كجم) مصنوع من غلاف خارجي كوردورا 1000D ومثانة داخلية كوردورا 500D.
  • يتم تضمين محول خزان واحد مع نظام 30 رطل / 13 كجم.
  • يتميز اللوح الخلفي بحواف مشعة بالكامل وشكل عضوي ناعم ، جنبًا إلى جنب مع مقبس الجوز المجوف للوح الخلفي ، وعدد الفتحات المعقولة وتحديد موضعها ، ومحاذاة المسامير الشبكية ، مما يجعل النظام مدروسًا جيدًا.


The Scubapro S-Tek Pure is a simple yet rugged system that consists of a continuous web harness teamed with a revolutionary designed 3D formed stainless steel backplate and a donut wing.

Stainless steel hardware includes a waist buckle, two pre-bent D-rings on the shoulders, one D-ring on the waist, and two D-rings on the crotch strap. The stainless steel backplate comes with Evo-Angle webbing slots for a more natural webbing routing that increases comfort and reduces webbing abrasion. The backplate also provides trim weight system mounting holes, an argon tank mounting point for drysuit divers, 2 x S-Tek Ergo Nuts, plus a convenient built-in carry handle.

The system is available with a 30lbs/13kg, 40lbs/18kg or 60lbs/27kg lift donut wing, with the 30lbs/13kg and 40lbs/18kg wings being suitable for single tank diving and the 40lbs/18kg and 60lbs/27kg wings for twin tank diving. The 30lbs/13kg system includes a single tank adapter.

The S-Tek Pure is a rugged and reliable tech diving system designed for those extended trips into the depths.


  • A continuous webbing harness provides a custom, individualised fit.
  • It can be configured as a fixed-shoulder length harness for ultimate simplicity, or in Extender mode, which allows the shoulder straps to extend for easier doffing & donning.
  • The stainless steel waist buckle allows for a full range of adjustments.
  • Two pre-bent D-rings on the shoulders, one D-ring on the waist, and two D-rings on the crotch strap are provided for clipping on extra gear.
  • Branded silicone epaulette on the left shoulder and branded silicone guide bands keep the inflator hose and straps in place.
  • The stainless steel backplate offers Evo-Angle webbing slots plus mounting points for trim weights, an argon tank for drysuit divers, plus a convenient built-in carry handle.
  • 2 x S-Tek Ergo Nuts – ergonomically designed, easier to tighten and loosen, and flushed mounted to prevent abrasion.
  • Donut wing (30lbs/13kg, 40lbs/18kg or 60lbs/27kg) is constructed of a 1000D Cordura outer shell and 500D Cordura inner bladder.
  • A single tank adapter is included with the 30lb/13kg system.
  • The backplate features fully radiused edges and a softened organic shape, along with the backplate’s recessed wingnut socket, rationalised hole count and positioning, and webbing bolthole alignment, making for a well-thought-out system.
المرفقات
3438 5149