العلامة التجارية الجديدة من ايبكس تأتي WSX-25 جنبًا إلى جنب ، وهو نظام أحزمة التثبيت الجانبي الغني بالميزات والذي يأتي مكتملًا مع الكيس الهوائي ، وحزام مع حزام المنشعب ، وحلقات D ، وحزمة مطاطي وحزمة بعقب.
صُنع الكيس الهوائي من Armoguard ، وهي مادة شديدة الصلابة توجد عادةً في منتجات غوص السلامة العامة والمنتجات العسكرية. هذه المادة الملساء أكثر مقاومة للتآكل بعشر مرات من مادة كوردورا القياسية (المواد المستخدمة في العديد من الاكياس الهوائية الجانبية الأخرى) ، مما يجعل هذا الجناح مصممًا للغطس الجانبي الجدي.
تعتبر الحلقة D المنزلقة "SlideLock" من ايبكس جديدة تمامًا وفريدة من نوعها لشركة ايبكس. يسمح للغواص بتغيير موضع الأسطوانات بسهولة مع تغير قابليتها للطفو أثناء الغوص. لا حاجة لقص الأسطوانة وإيقافها ، ما عليك سوى ضبط موضع الحلقة D أثناء الغوص.
نظام اللوحة المكونة من قطعتين قابل للتعديل إلى أي طول جذع تقريبًا ، مما يجعل هذا مقاسًا واحدًا يناسب جميع الأنظمة. يحتوي النظام أيضًا على أقسام حزام فردية بدلاً من قطعة واحدة طويلة تمر عبر الحزام ، مما يعني أنه يمكن تعديل النظام بالكامل بسرعة وسهولة.
الكيس الهوائي:
- 27lbs رفع
- Armoguard الخارجي
- طبقة واقية إضافية من Armoguard تحمي الكيس الهوائي من التآكل في الأماكن الضيقة
- يمكن تركيب منفاخ عكسي على الجانب الأيسر أو الأيمن
- الحلقات الموجودة في الزوايا السفلية تسمح بتركيب مطاط للحفاظ على انسيابية الكيس الهوائي مع جسمك
الحزام:
- يأتي الحزام الصلب مقاس 2 بوصة (5 سم) مُجمَّعًا مسبقًا
- شريط المنشعب القابل للإزالة مصنوع من حزام ناعم 2 بوصة (5 سم)
- حلقات D من الفولاذ المقاوم للصدأ مقاس 4 × بوصتين (2 بزاوية على الكتفين ، وواحدة بزاوية وواحدة مسطحة على حزام المنشعب)
- 2x "SlideLock" حلقات D انزلاقية من الفولاذ المقاوم للصدأ على حزام الخصر تسمح بتعديل سهل للأسطوانات طوال فترة الغوص
- 2x حلقات من الفولاذ المقاوم للصدأ على شكل D على طول الجزء السفلي من الظهر للتوصيل بحزمة المؤخرة المضمنة ، أو لعوامات التحديد أو البكرات أو غيرها من الملحقات
- مشبك خصر شديد التحمل مصنوع من الفولاذ المقاوم للصدأ
- صفيحة من الفولاذ المقاوم للصدأ مكونة من قطعتين تسمح بتعديل طول الجذع ليناسب أي غواص
- حزمة بعقب بسحاب مع خطافات مبكرة من الفولاذ المقاوم للصدأ متضمنة.
- يتم تثبيت أكياس الوزن على حزام العمود الفقري وتحمل أكثر من 18 رطلاً (9 كجم) من الوزن.
- تأتي كاملة بمقاسين من المطاط وخمسة مسامير من الفولاذ المقاوم للصدأ.
- يسمح شريطا جروميت للغواص بضبط كيس الوزن والكيس الهوائي بناءً على متطلباتهم الخاصة.
Brand new from Apeks comes the WSX-25 sidemount harness, a feature-rich sidemount harness system which comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.
The bladder is constructed from Armoguard, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard Cordura (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind.
The Apeks “SlideLock” sliding D-ring is brand new and unique to Apeks. It allows the diver to easily change the position of the cylinders as their buoyancy changes during the dive. No need to clip your cylinder on and off, simply adjust the position of the D-ring during your dive.
The two-piece plate system is adjustable to nearly any torso length, making this a one size fits all system. The system also has individual webbing sections rather than one long piece running through the harness, which means the complete system can be quickly and easily adjusted.
Bladder:
- 27lbs lift
- Armoguard exterior
- Additional protective layer of Armoguard protects the bladder against abrasions in confined spaces
- Reversible inflator can be mounted on left or right side
- Grommets at lower corners allow for mounting bungee to keep the bladder streamlined to your body
Harness:
- Solid 2” (5cm) webbing comes pre-assembled
- Removable crotch strap made of 2” (5cm) soft webbing
- 4x two inch stainless steel D-rings (2 angled on shoulders, 1 angled and 1 flat on the crotch strap)
- 2x “SlideLock” sliding stainless steel D-rings on waist strap allow for easy adjustment of cylinders throughout the dive
- 2x stainless steel drop D-rings along the lower back are for connection to the the included butt pack, or for marker buoys, reels or other accessories
- Heavy-duty waist buckle made of stainless steel
- Two-piece stainless steel plate allows the torso length to be adjusted to fit any diver
- Zippered Butt Pack with stainless steel snap hooks included.
- Weight pouches are mounted on the spine strap and hold over 18lbs (9kgs) of weight.
- Comes complete with two sizes of bungee and five stainless steel bolt snaps.
- Two grommet strips allow the diver to adjust the weight pouch and bladder based on their specific requirements.